| Specifications : |
 |
Model no : TE550 / Die-cast / SA |
|
Forward bandwidth : 48-550 MHz / 750 MHz / 860 MHz |
|
Reverse bandwidth : 5 to 30 MHz standard |
|
Module : 5 to 40 / 50 / 65 MHz optional. |
|
Gain : 30dB |
|
Gain control range : 0-20dB |
|
Slope control range : 0-18dB |
|
Noise figure : 7dB |
| |
|
| Test point: |
| 1) |
At the i/p of forward amp.: -20dB |
| 2) |
At the o/p of forward amp.: -20dB
Test point at the input & output of reverse path.
Power requirement: 30V AC to 60V AC in line powering mode |
| Features : |
|
Use of SMD technology makes it more stable & compact. |
|
Flat frequency response. |
|
Selectable single or - 4dB dual output with the help
of plug in module to choose between higher single o/p
level and - 4dB lower dual o/p without the use of outdoor
splitter. |
|
Variable gain & slope control to facilitate trunk
line setting. |
|
Use of SMPS makes longer & lightweight cascade of
amplifiers. |
|
Works on line powering from input or output ports thereby
it is possible to use power supply in the middle of the
amplifier cascade thereby doubling the cascade length. |
|
Weather resistant die-cast housing makes it possible
to employ this amplifier at the optimum distance along
the trunk line in open surroundings, there by covering
longer distance. |
|
Plug in type equalizer to select smaller bandwidth there
by taking advantage of higher o/p levels. |
| |
|
| |
